Ruijie RG-WLAN Series

Configuration Guide Configuring RADIUS
 Configuring the MAC Address Format of RADIUS Attribute No. 31 (Calling-Station-ID)
 Optional.
 Set the MAC address format of Calling-Station-Id to a type supported by the server.
 Configuring the Parsing Mode of the RADIUS Class Attribute
 Optional.
 Configure the parsing mode of the Class attribute according to the server type.
 Configuring the RADIUS Private Attribute Type
 Optional.
 If the server is a Ruijie application server, the RADIUS private attribute type needs to be configured.
 Setting the Private Attribute port-priority Issued by the Server to the COS Value of an Interface
 Optional.
 Set the private attribute port-priority issued by the server to the COS value of an interface as required.
 Configures the Device to Support the CUI Attribute
 Optional.
 Configure whether the device supports the RADIUS CUI attribute as required.
 Configuring the Mode of Parsing Private Attributes by the Device
 Optional.
 Configure the index of a Ruijie private attribute parsed by the device as required.
 Configuring Whether the RADIUServer Parses a Specified Attribute of Cisco, Huawei or MS Carried by Packets
 Optional.
 Configure whether to parse the specified attribute of cisco, huawei or ms carried by packets. By default, this function is
enabled.
Verification
 Configure the AAA method list that specifies to conduct authentication, authorization, and accounting on users by using
RADIUS.
 Enable the device to interact with the RADIUS server. Conduct packet capture to display the MAC address format of
Calling-Station-Id.
 Enable the device to interact with the RADIUS server. Display the debug information of the device to check that Ruijie
private attributes are correctly parsed by the device.