Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring DHCP Snooping
 Enable this feature to timely save the DHCP Snooping binding database information in case that client reboot.
 Unless otherwise noted, the feature should be configured on access devices.
 Enabling BOOTP Support
 Optional
 Unless otherwise noted, the feature should be configured on access devices.
 Enabling DHCP Snooping to Deal with Relay Request Packets.
 Optional.
 Unless otherwise noted, the feature should be configured on access devices.
Verification
Configure a client to obtain network configurations through the DHCP protocol.
 Check whether the DHCP Snooping Binding database is generated with entries on the client.
Related Commands
 Enabling or Disabling DHCP Snooping
Command
[ no ] ip dhcp snooping
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
After global DHCP Snooping is enabled, you can check DHCP Snooping using the show ip dhcp snooping
command.
 Configuring VLAN-based DHCP Snooping
Command
[ no ] ip dhcp snooping vlan { vlan-rng | {vlan-min [ vlan-max ] } }
Parameter
Description
vlan-rng: Indicates the range of VLANs
vlan-min: The minimum VLAN ID
vlan-max: The maximum VLAN ID
Command
Mode
Global configuration mode
Usage Guide
Use this command to enable or disable DHCP Snooping on specified VLANs. This feature is available only
after global DHCP Snooping is enabled.
 Configuring DHCP Snooping Packet Suppression
Command
[ no ] ip dhcp snooping suppression
Parameter
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English