Configuration Guide Configuring ACL
deny host any host any tos dscp
precedence fragment time-range
Adds a deny ACE to an extended IP ACL.
Applies a standard or an extended IP ACL.
Configuring an MAC
Extended ACL
(Optional) It is used to filter L2 packets.
Configures an MAC extended ACL.
permit any host any host cos inner
time-range
Adds a permit ACE to an MAC extended
ACL.
deny any host any host cos inner
time-range
Adds a deny ACE to an MAC extended ACL.
Applies an MAC extended ACL.
Configuring an Expert
Extended ACL
(Optional) It is used to filter L2 and L3 packets.
expert access-list extended
Configures an expert extended ACL.
permit cos inner VID inner host any host
any host any host any precedence tos
fragment range time-range
Adds a permit ACE to an expert extended
ACL.
deny cos inner VID inner host any host any
host any host any precedence tos
fragment range time-range
Adds a deny ACE to an expert extended
ACL.
expert access-group in out
Applies an expert extended ACL.
Configuring an IPv6
Extended ACL
(Optional) It is used to filter IPv6 packets.
permit host any host any range dscp
flow-label fragment time-range
Adds a permit ACE to an IPv6 ACL.
deny host any host any range dscp
flow-label fragment time-rangelog
Adds a deny ACE to an IPv6 ACL.
ipv6 traffic-filter in out
(Optional) It is used to customize the fields for filter L2 and L3 packets.
expert access-list advanced
Configures an expert advanced ACL.
Adds a permit ACE to an expert advanced
ACL.
Adds a deny ACE to an expert advanced
ACL.
expert access-group in out
Applies an expert advanced ACL
Configuring ACL Redirection
(Optional) It is used to redirect packets meeting the rules to a specified interface.
redirect destination interface acl in
Configures ACL redirection.
To Next Page
Loading...
Need help?
General
