EasyManuals Logo

Sartorius Cubis MCA2.7S User Manual

Sartorius Cubis MCA2.7S
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38 Operating Instructions Cubis
®
MCA
Operating Design
Level 1 Level 2 Level 3 Description
Device
settings
Draft shield Lighting brightness Only for devices with a motorized draft shield:
Activate or deactivate the LED strip.
Opening angle, right key Only for devices with a motorized draft shield:
Configure how far the draft shield is opened
bypressing the right palm key.
Opening angle, left key Only for devices with a motorized draft shield:
Configure how far the draft shield is opened
bypressing the left palm key.
Start-up behavior Initial zeroing | taring Activate or deactivate automatic zeroing
and taring when starting the device.
Automatic login Activate or deactivate automatic log-in
ofthe last user when starting the device.
User identification service Activates a user identification for
theservice.
Automatic start of last
task
Activate or deactivate automatic start of the
last task when starting the device.
Display settings Display brightness Define the brightness of the operating
display.
On | off switch Activate or deactivate the “energy saving”
function.
Color scheme Define the settings for the operating display
color scheme if this extension has been
configured in the QAPP Center.
Sound (loudspeaker) Touch sounds Activate or deactivate the acoustic signal
when operating a button.
Message sounds Activate or deactivate the acoustic signal
for messages.
Sound for end-of-action Activate or deactivate the acoustic signal
for the end of an action.
Device
maintenance
Update firmware List of connectors and
then list of firmware
Starts a firmware update.
Not for conformity-assessed devices.
Install QAPP Center List of connectors and
then list of QAPP Centers
Updates the QAPP Center using the
selected connector.
Install customized
QAPP
List of connectors and
then list of customized
QAPPs
Updates a customized QAPP using
theselected connector.
Device data backup List of connectors Saves the device data on the selected
connector.
Restore device data List of connectors Loads saved device data from the selected
connector.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sartorius Cubis MCA2.7S and is the answer not in the manual?

Sartorius Cubis MCA2.7S Specifications

General IconGeneral
BrandSartorius
ModelCubis MCA2.7S
CategoryScales
LanguageEnglish

Related product manuals