24
Brief Instructions for Setting a Menu Code
Turn your balance off and then back on again.
While all segments are displayed, briefly press the tare control.
lf "- L -" is displayed, change to the "- C - " mode using the menu access switch.
Select the desired code number as follows:
– press
to increase it or
–
to decrease it.
Select the left, middle or right place äs follows:
– press the
key to go toward the left
– press the key to go toward the right
Confirm your code selection by pressing the tare control
Adjust the menu access switch back to the original setting - readout: – L –
To leave the menu, press
To Next Page
Loading...
Need help?
General