28
Below-Balance Weighing
A port for a below-balance weighing hanger is available on the bottom of the
balance.
To fasten the hanger, open the below-balance port by removing the two screws on
the bottom of the balance and detaching the closing plate.
Now you can attach a sample using a Suspension wire, for example.
Common applications for below-balance weighing include specific gravity deter-
mination or immersing a sample in a special atmosphere (medium for reaction).
You can also use the M2 thread to attach a sample.
Important Note
When you use such below-balance weighing hangers, you must install a shield to
eliminate drafts..
How to Fasten the Antitheft Locking Device
To fasten the antitheft locking device, use the lug (16) located on the rear panel of
the balance.
At the place of installation, secure your balance with the lock.
To Next Page
Loading...
Need help?
General