32
“Time”
— Use
or to select hours, minutes, seconds or 12-hr/24-hr mode.
— Use the or key set “hours” and “minutes”
— Use
to set the “seconds” to zero according to your local time
— Use
to set the “12-hr/24-hr” display mode.
In the 12-hr mode, the “A” or “P” in front of the “hours” means:
A = morning
B = afternoon
— Use
to store the setting or press the key to select the Date/ID no.
“Date”
— Use
or to select the day, month or year
— Change the setting using
or
— Store the setting using
or select ID No./Time using the key
- Store all settings by pressing
Reset Function
This function enables you to reset all menu codes back to the original factory settings, which are indicated by an "*" throughout
this part of the instruction manual.
To activate this special function, set and confirm menu code 9- -l°, and press the
key to store it and leave the menu.
To Next Page
Loading...
