12
Stability Symbol Delay
This setting allows your balance to compensate for individual interfering factors which slowly subside, such as turbulent air
currents generated within the weighing chamber.
Code
No delay 1 4 1
Short delay * 1 4 2
long delay 1 4 3
Extremely long delay 1 4 4
Tare Parameter
You can define when the balance will perform the taring Operation:
Code
At any time 1 5 1
not until the readout is stable * 1 5 2
Auto Zero Function
When this zero tracking function is activated, any changes off of the zero readout that are equal to a defined fraction of digits
per second are automatically tared. In other words, it ensures a stable zero.
Code
Auto Zero on * 1 6 1
Auto Zero off 1 6 2
* = Factory setting
To Next Page
Loading...
