14
Overview of the Weight Units:
Symbol Code
1
st
range 2
nd
range 3
rd
range
Grams o 1 7 1 3 1 1 3 3 1
Grams g *1 7 2 *3 1 2 3 3 2
Kilograms kg 1 7 3 3 1 3 3 3 3
Carats ct 1 7 4 3 1 4 3 3 4
Pounds lb 1 7 5 3 1 5 3 3 5
Ounces oz 1 7 6 3 1 6 3 3 6
Troy ounces ozt 1 7 7 3 1 7 3 3 7
Hong Kong taels tl 1 7 8 3 1 8 3 3 8
Singapore taels tl 1 7 9 3 1 9 3 3 9
Taiwanese taels tl 1 7 10 3 1 10 3 3 10
Grains gr 1 7 11 3 1 11 3 3 11
Pennyweights dwt 1 7 12 3 1 12 3 3 12
Milligrams mg 1 7 13 3 1 13 *3 3 13
Codes 1 7 1, 3 1 1 and 3 3 1 are reserved for programming special units to meet the needs of customized applications. The
Standard, factory-set unit is grams.
In the display, you will see "o" as the stability symbol for a stable readout, just as for kilograms.
Some unit Symbols printed on hardcopy or output on a Computer screen will differ from the way they are shown on the
balance display:
This applies to code numbers ending with 3 = kg
6 = tlh
9 = tls
10 = tlt
* = Factory setting
To Next Page
Loading...
Need help?
General