SATO E series User Manual

Section 2: Command Codes
SATO Programming Reference PN 9001096 Rev. A Page 2-31
Printer Output
Special Notes 1. The Pitch command can be used with Vector fonts.
2. If the font size designation is out of the specified range, a default value
of 50 is used.
3. The font width and height values include ascenders, descenders, and
other space.
4. A font must be defined for each field to be printed. There is no default
font.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi