SATO E series User Manual

Section 2: Command Codes
Page 2-38 SATO Programming Reference
Printer Output
Special Notes 1. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
2. A custom graphic cannot be enlarged by the <ESC>L Character
Expansion command.
3. A custom graphic is not affected by either of the Rotation com-
mands. Therefore, always design and locate your graphic image to
print in the appropriate orientation.
4. To store graphic images in optional Expanded Memory, see the
Expanded Memory Functions section.
5. The binary format reduces the transmission time by 50%.
6. See Table 1 in Section 1. Programming Concepts for values of
Hmax and Vmax.
7. Use the <ESC>E0 Expanded Print Length command to get the max-
imum label length.

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi