Section 3. Calendar Commands
SATO Programming Refernece Page 3-3
Special Notes
1. Once the year increments past “99” it will wrap back to “00”. 2.
This command can only be used once per data stream.
2. The printer’s internal clock may be set through the Calendar Set
command.
3. Calendar Commands
4. If a print quantity of more than one label per job is used, the same
time and date will be on each label of the entire print job.
5. Calendar Increment Example: 1998 January 15 (ww = 03) plus 48
weeks = week 51
6. The Week Calendar specification follows ISO8601. Days of the
week are numbered 1 thru 7, beginning with Monday. The first
week of the year is the week containing the first Thursday. If Janu-
ary 1st falls on Friday, it belongs to the last week of the previous
year. If December 31st falls on a Wednesday, it belongs to the first
week of the following year. If Calendar Increment calculation
extends over the year, the result belongs to the week number of
the following year.
To Next Page
Loading...
Need help?
General
