SATO S84 ex - Installation of Options; Installation of the Optional RFID Kit

4 Operation and Configuration
101
S84-ex/S86-ex Operator Manual
DHCP SETTING
Enable or disable DHCP.
• ENABLE: Enable DHCP.
• DISABLE: Disable DHCP.
Note
The setting will be effective after you power on the product again.
IPv4 ADDRESS
Set the IPv4 address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 192.168.001.001.
Note
The setting will be effective after you power on the product again.
IPv4 SUBNET MASK
Set the IPv4 subnet mask address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 255.255.255.000.
Note
The setting will be effective after you power on the product again.
IPv4 GATEWAY ADR
Set the IPv4 gateway address.
The setting range is from 0.0.0.0 to 255.255.255.255.
The default value is 000.000.000.000 for LAN and 192.168.001.002 for
WLAN.
Note
The setting will be effective after you power on the product again.