4 Operation and Configuration
50
S84-ex/S86-ex Operator Manual
• Trace mode status
• WLAN field intensity status
• Bluetooth connection status
Icon Description
Shows after receiving any data while trace mode is ENABLE.
Shows after receiving ESC (1BH) A while trace mode is ENABLE.
Shows after print operation while trace mode is ENABLE.
Icon Description
Infrastructure
Mode
Ad Hoc
Mode
The meaning of this icon differs depending on the wireless LAN
mode.
In Infrastructure mode
Shows when the field intensity is more than level 3 and the
product is connected to an access point.
In Ad Hoc mode
Always shows when the product is connected.
OO
Shows when the field intensity is between levels 2 and 3, and
the product is connected to an access point.
O Not used
Shows when the field intensity is between levels 1 and 2, and
the product is connected to an access point.
O Not used
The meaning of this icon differs depending on the wireless LAN
mode.
In Infrastructure mode
Shows when the field intensity is less than level 1 and the
product is connected to an access point.
However, it may be possible to communicate depending on the
environment.
In Ad Hoc mode
Always shows when the product is not connected.
OO
Shows when the product is not connected to an access point. O Not used
Icon Description
Shows when Bluetooth is connected.
Shows when Bluetooth is disconnected.
To Next Page
Loading...
