SATO S84 ex - Service Mode

9 Appendix
329
S84-ex/S86-ex Operator Manual
9.1.10 Service Mode
Setting Item Initial Value
Default
(User)
Default
(Shipping)
SERVICE MODE SENSOR LEVEL - -
SETTING
AUTO ONLINE FEED NO Yes Yes
FEED ON ERROR NO Yes Yes
FUNCTION KEY NONE Yes No
REPRINT W/FEED NO Yes Yes
CALENDAR REPRINT YES Yes No
FORWARD/BACKFEED
DISTANCE
DEFAULT Yes No
EXT 9PIN SELECT MODE1 Yes No
PRN READY TYPE DATA READY Yes No
PREND TYPE 3/4
NORMAL (only when RFID kit is installed) Yes No
BACKFEED SPEED FAST Yes Yes
EURO CODE D5 No No
SELECT LANGUAGE ENGLISH Yes Yes
PRIORITY SETTING COMMAND Yes No
RIBBON NEAR END ENABLE Yes No
LABEL RE-DETECT ENABLE Yes Yes
SET PASSWORD OFF - -
PASSWORD NO. 0000 No No
LEGACY COMMAND SUPPORT OFF Yes No
COMPATIBLE MODE HEAD SIZE NORMAL Yes No
COMPATIBLE MODE DARKNESS ENABLE Yes No
PRINTER MODEL S84-ex: S84/M8459Se
S86-ex: M8485/90/60/65Se
Yes No
MEDIA LENGTH S84-ex 8 dots/mm: 2500 mm
12 dots/mm: 1500 mm
24 dots/mm: 400 mm
S86-ex: 1249 mm
Yes No
TRACE MODE DISABLE Yes No
SAVE PRINT LOG DISABLE Yes No
MEMORY SELECT SD CARD Yes No
CLEAR PRINT LOG NO - -
OUTPUT PRINT LOG FROM
SUBPORT
DISABLE Yes No