2 Installing the Product
34
S84-ex/S86-ex Operator Manual
2.4.4
Interface Combination
The interface combinations that can be used for the data port and sub port are as follows.
[o: configurable, x: not configurable]
Note
• The optional Bluetooth and optional wireless LAN are available if you have installed them.
• Do not select the same interface for the data port and sub port.
• If you have installed the optional wireless LAN, you cannot use the USB interface. The optional wireless
LAN is connected to the product through the USB.
• The sub port cannot be used if you have set ENABLE in the INTERFACE AUTO SELECT screen.
• When WLAN is configured for the data port or sub port, but the product is powered on without the wireless
LAN adapter, the configured interface setting is changed from WLAN to USB. When USB is configured as
the data port or sub port, but the wireless LAN adapter is connected, the configured interface setting is
changed from USB to WLAN.
Data Port
USB LAN RS-232C IEEE1284 Bluetooth WLAN
Sub Port
USB xoooox
LAN o
xoooo
RS-232C o o
xooo
IEEE1284 o o o
xoo
Bluetooth o o o o
xo
WLAN x o o o o
x
NONEoooooo
To Next Page
Loading...
