SATO S84 ex - Notification Function

9 Appendix
345
S84-ex/S86-ex Operator Manual
9.6 Notification Function
This section shows the media motion when the set notification interval has been reached.
You can set the notification function in the NOTIFICATION FUNCTION SETTING screen of the user
mode menu.
Print head position
Standby
PRINTING…
Standby
After three seconds
Warning
message
(1)
(2)
(3)
(1) (2)
(3)
(1)
(2) (3)
Notification distance
has been reached.
(3)
• The counter is cleared by pressing the ENTER button while
the warning message is shown. (Start counting from 0 again.)
• When resuming printing without pressing the
ENTER button,
the product enters the offline mode and the counter is not
cleared. (The warning is shown again while in standby mode.)
• When the LINE button is pressed, the product enters online
or offline mode from the warning screen. The same goes for
other buttons, entering each screen.