SATO S84 ex - Upload Mode

4 Operation and Configuration
201
S84-ex/S86-ex Operator Manual
4.2.20 Upload Mode
The upload feature allows the operator to upload data (firmware, font/logo, TrueType font, configuration,
status5 log) from the product and write it to an SD card or USB memory. When uploading is complete,
the LCD screen will return to the original screen after three seconds. If an error occurs, an error message
will show and the reason will be identified.
CAUTION
Be sure to perform a virus check on the USB memory or SD card before connecting it to the product. SATO
Corporation shall not be held responsible for any product malfunctions caused by a virus spread via USB
memory or SD card.
Press button
+
Power On
・If the item selected on the UPLOAD SELECT screen does not have
data to be uploaded, nothing will be uploaded.
・Selecting ALL will upload all the items on the UPLOAD SELECT
screen.
・Screen messages are shown in English regardless of the setting
value on the SELECT LANGUAGE screen.
Upload
completed?
Yes
No
Reading the data
Writing the data
Finished receiving the uploaded data
Finished writing the uploaded data
3 short beeps when the upload
is completed
button
button
button