SATO S84 ex - Simple Standalone Mode

9 Appendix
331
S84-ex/S86-ex Operator Manual
9.1.13 Simple Standalone Mode
9.1.14 Wireless LAN Setting
Setting Item Initial Value
Default
(User)
Default
(Shipping)
STANDALONE MODE LOAD - -
OUTPUT LABEL QTY 000001 - -
Setting Item Overview Contents
Default
(WLAN)
Initial Value
MACAddress MAC address Not configurable No NULL
IPSetupMethod DHCP/BOOTP setting
0: DISABLE
1: ENABLE
Yes DISABLE
LocalIPAddress IP Address xxx.xxx.xxx.xxx Yes 192.168.1.1
SubnetMask Subnet Mask xxx.xxx.xxx.xxx Yes 255.255.255.0
GatewayAddress Gateway Address xxx.xxx.xxx.xxx Yes 192.168.1.2
DNSPrimaryIPAddress DNS primary address xxx.xxx.xxx.xxx Yes 0.0.0.0
DNSSecondaryIPAddress DNS secondary address xxx.xxx.xxx.xxx Yes 0.0.0.0
WLANMode
Wireless LAN mode
setting
0: Ad Hoc mode
1: Infrastructure mode
Yes Ad Hoc mode
ESSID SSID 1 - 32 characters Yes “SATO_PRINTER”
Channel Channel number 1 - 13 Yes 6
WLANNetworkAuth Network authentication
0: Open System
1: Shared Key
2: WPA
3: WPA2
Yes Open System
WEPKeyUse WEP key OFF/ON
0: DISABLE
1: ENABLE
Yes DISABLE
WEPKey1 WEP key 1
5 or 13 characters
10 or 26 digits in hex
Yes “B”
WEPKey2 WEP key 2
5 or 13 characters
10 or 26 digits in hex
Yes “B”
WEPKey3 WEP key 3
5 or 13 characters
10 or 26 digits in hex
Yes “B”
WEPKey4 WEP key 4
5 or 13 characters
10 or 26 digits in hex
Yes “B”
WEPKeyIndex WEP Key Index 1 - 4 Yes 1
EAPAuth
802.1x authentication
OFF/ON
0: DISABLE
1: ENABLE
Yes DISABLE