9 Appendix
360
S84-ex/S86-ex Operator Manual
9.10
Optional UHF RFID Configuration
This section provides more information on the RFID operations.
1 Examine the media to determine the
settings of the product.
Refer to the S84ex UHF Inlay Configuration
Guide for the measurements you should take and
what they mean, as well as a list of inlays and
their required configurations.
2 Press the power switch on the operator
panel to “I” position.
3 When the product is in online mode,
press the LINE button on the operator
panel to change to offline mode.
4 Press the ENTER button to show the
setting mode menu.
5 Press the /// buttons to select
RFID USER MODE and then press the
ENTER button.
The RFID USER MODE screen shows.
6 Press the /// buttons to select
the item or set the value accordingly. The
active arrow icons are shown on the
screen.
Refer to Section 4.2.15 RFID User Mode for
details on the configuration items.
To Next Page
Loading...
