9 Appendix
361
S84-ex/S86-ex Operator Manual
7 Open the top cover .
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
8 Turn the head lock lever clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
9
Load the media and ribbon.
Refer to Section 3.2 Loading the Ribbon and
Section 3.5 Loading Media for details.
10
Confirm the operation by printing/
encoding a media.
Make sure that you read the data and check that it
is correctly encoded.
To Next Page
Loading...
