SATO S84 ex - RFID User Mode

2 Installing the Product
26
S84-ex/S86-ex Operator Manual
2.2 Installation Space
Make sure that there is sufficient space around the product so that the top cover can be fully opened
when operating or cleaning the product, or replacing consumables. And make sure that there is sufficient
space on the rear side of the product so that the rear housing cover can be fully opened during
maintenance.
The illustrations in this section show the product from different angles, providing dimensions and spatial
requirements.
2.2.1 Front View (S84-ex/S86-ex)
245 mm (9.6”)
117.5 mm
(4.6”)
117.5 mm
(4.6”)
5 mm (0.2”)
265 mm (10.4”)
30 mm
(1.2”)
150 mm (5.9”)
Ø 5 mm (0.2”)
5 positions
36 mm
(1.4”)
Americas: Standard/Right Hand
Europe/Asia: Left Hand