SATO S84 ex - Memory Mode

9 Appendix
324
S84-ex/S86-ex Operator Manual
9.1.4 Memory Mode
9.1.5 Advanced Mode
Setting Item Initial Value
Default
(User)
Default
(Shipping)
SLOT SETTING NO Yes Yes
CARD SLOT SELECT SLOT0 RAM Yes Yes
CARD SLOT SELECT SLOT1 FROM Yes Yes
CARD SLOT SELECT SLOT2 SD Yes Yes
MEMORY MODE MEMORY SIZE - -
STORED CONTENTS FORM OVERLAY - -
MEMORY FORMAT NO - -
FORMAT START NO - -
Setting Item Initial Value
Default
(User)
Default
(Shipping)
PRINTER TYPE DISPENSER Yes Yes
BACKFEED MOTION BEFORE Yes Yes
PRINT METHOD TRANSFER (Set to DIRECT with direct
thermal model)
Yes Yes
PITCH SENSOR ENABLE (When CONTINUOUS is
selected)
Yes Yes
SENSOR TYPE GAP Yes Yes
COMMAND ERROR DISABLE Yes Yes
HEAD CHECK DISABLE Yes Yes
HEAD CHECK NORMAL (When HEAD CHECK is
enabled)
Yes Yes
HEAD CHECK MODE ALL (When HEAD CHECK is enabled) Yes Yes
HEAD CHECK PAGE NO. 000001 (When CHECK PAGE is
selected)
Yes Yes
EXTERNAL SIGNAL SETTING NO - -
EXTERNAL SIGNAL ENABLE Yes Yes
EXTERNAL SIGNAL TYPE4 Yes Yes
EXTERNAL REPRINT DISABLE Yes Yes
CONTINUOUS PRINT DISABLE Yes Yes
ENHANCED REPRINT DISABLE Yes Yes