SATO S84 ex - Emulation Mode

237
S84-ex/S86-ex Operator Manual
The emulation mode allows the product to function in virtually all legacy external party programming
language environment without requiring modification to host data stream.
5.1 Emulation Module Loader
When the product is started up with the emulation loader, user can load or delete the selected emulation
module, or download emulation module.
The flowchart shows the sequence of the setting screens for the emulation loader.
1 Press and hold the FUNCTION button and power on the product. Release the
FUNCTION button when the buzzer beeps.
5
Emulation Mode
MODULE SETTING
Select the module loader function using the / buttons and then press
the ENTER button.
• LOAD: Load the standard firmware or emulation firmware.
• DELETE: Delete the selected emulation module.
• DOWNLOAD: Download the emulation firmware to the product.
Note
If there is no emulation module downloaded to the
memory of product,
you cannot select the DELETE function.
Press the button
+
Power On
02'8/(/2$'(5
9(5;;;;;;
'(/(7(
'2:1/2$'
02'8/(6(77,1*
/2$'
'(/(7(
02'8/(6(77,1*