SATO S84 ex - Interface Mode

4 Operation and Configuration
80
S84-ex/S86-ex Operator Manual
4.2.10 Interface Mode
The flowchart shows the sequence of the setting screens for the interface mode. The table describes
each setting screen in detail.
Setting contents vary depending on the interface.
Select NO +
button
Shows only if the
PASSWORD input is
enabled
Select YES +
button
Select “DATA PORT”
+ button
Select “USB”/ “LAN”/ “RS-232C”/ “IEEE1284”
/“Bluetooth”/“WLAN”+ button
Select “NONE” + button
Proceed to .
button
button
button
button
button
button
button
button
button
button
button
Select “SUB PORT” + button
* Press the , , or button to select an item or set the value
accordingly. The active arrow icons are shown on the screen.
* Pressing the button on each screen will revert to the
INTERFACE MODE menu.
button
To the USB setting
To the LAN/WLAN setting
To the RS-232C setting
To the IEEE1284 setting
To the Bluetooth setting
I-F
I-A
I-D
I-B
I-C
I-E