SATO S84 ex - Deleting the Emulation Module

5 Emulation Mode
240
S84-ex/S86-ex Operator Manual
5.1.2 Deleting the Emulation Module
In the emulation module loader, user can delete the downloaded emulation module to free up memory
space in the product.
The flowchart shows the sequence of the setting screens for deleting the emulation module. The table
describes each setting screen in detail.
MODULE DELETE
Select the module to be deleted using the / buttons and then press
the ENTER button.
• ALL: Delete all the downloaded emulation firmware.
• SZPL (XX.XXX): Delete the downloaded SZPL emulation firmware.
• SDPL (XX.XXX): Delete the downloaded SDPL emulation firmware.
• SIPL (XX.XXX): Delete the downloaded SIPL emulation firmware.
Note
The XX.XXX is the module version information.
Select DELETE
+ button
'(/(7(
'2:1/2$'
02'8/(6(77,1*
/2$'
'(/(7(
02'8/(6(77,1*
(08/$7,21
6,3/;;;;;
02'8/(/2$'
(08/$7,21
6'3/;;;;;
02'8/(/2$'
$//
6=3/;;;;;
02'8/('(/(7(
02'8/('(/(7(
&203/(7('
button
3 beeps
button
$//02'8/(
'(/(7,1*
Return to MODULE
SETTING screen
when all the
emulation modules
are deleted.