SATO S84 ex - Setting Mode Menu

4 Operation and Configuration
72
S84-ex/S86-ex Operator Manual
4.2.8 Setting Mode Menu
In the settings mode menu, the setting modes are shown as follows:
Select the setting mode according to the following procedure:
1 Press the LINE button to change the
product to offline mode.
The product changes to offline mode.
2 Press the ENTER button.
The product changes to the setting mode menu.
3 Select the setting mode using the
/// buttons.
The selected setting mode shows on the screen and
the icon is highlighted by inverting its colors.
4 Press the ENTER button to enter the selected mode.
Menu Description
Online mode
Returns to online mode.
User mode
Access the settings related to the basic user configurations.
Interface mode
Access the settings related to the interfaces.
Memory mode
Access the settings related to the memory.
Service mode
Access the settings related to the media sensor adjustment and various
functions activation.
Advanced mode
Access the settings related to the advanced product configurations.
Hex dump mode
Access and print the hex dump for troubleshooting.
RFID user mode
Access the settings related to the optional RFID module.
Shows only if you have installed the optional RFID kit and enabled the RFID
mode.
Information mode
Access the information of this product.