SATO S84 ex - Replacement

4 Operation and Configuration
53
S84-ex/S86-ex Operator Manual
4.1.2 Setting Mode Menu and Icons
In the setting mode menu, the screen is shown as follows.
Refer to Section 4.2.8 Setting Mode Menu for more details.
• Setting Mode
Icon Description
The product enters the normal mode.
The product enters the user mode.
The product enters the interface mode.
The product enters the memory mode.
The product enters the service mode.
The product enters the advanced mode.
The product enters the hex dump print mode.
The product enters the RFID user mode.
* Shows only if you have installed the optional RFID kit and enabled the RFID mode.
The product enters the product information mode.
The product enters the loaded emulation mode.
* Shows only if you have loaded with the selected emulation firmware module.
Setting mode icons
When an icon is
selected, its color is
inverted.
Selected setting mode
Shows valid arrow buttons
for selection.
Shows the emulation icon
when the selected emulation
module is loaded.