SATO S84 ex - Wireless LAN Interface

9 Appendix
400
S84-ex/S86-ex Operator Manual
9.12.7 Wireless LAN Interface
This interface complies with the IEEE802.11b/g/n standard.
CAUTION
Before using wireless LAN near medical devices and facilities, consult your system administrator.
Basic Specifications
Protocol Status3, Status4, Status5
IP version IPv4
IP Address IPv4: 0.0.0.0 - 255.255.255.255
Initial: 192.168.1.1
Subnet Mask IPv4: 0.0.0.0 - 255.255.255.255
Initial: 255.255.255.0
Gateway Address IPv4: 0.0.0.0 - 255.255.255.255
Initial: 192.168.1.2
Data Transfer Method 802.11n: max 135 Mbps
802.11b: max 11 Mbps
802.11g: max 54 Mbps
Note
These are the logical values based on the wireless LAN specifications and
are not the actual data transfer speeds.
Communication Distance Indoor: max 100 m
Outdoor: max 240 m
Communication distance depends on environment.
Frequency Band 2.4 GHz (2.412 to 2.485 GHz)
Communication Channel The number of channels you can set varies depending on the region
where you use the product.
SSID Any alphanumeric character (maximum 32)
Default: SATO_PRINTER
Authentication Open System
Shared Key
WPA/WPA2
Perform the RADIUS server authentication using 802.1x (EAP-TLS, LEAP,
EAP-TTLS, EAP-PEAP, EAP-FAST protocol)
Encryption None
WEP (64 bits/128 bits)
TKIP (WPA-PSK/WPA2-PSK, WPA-802.1x/WPA2-802.1x authentication)
AES (WPA-PSK/WPA2-PSK, WPA-802.1x/WPA2-802.1x authentication)