25
S84-ex/S86-ex Operator Manual
2.1
Installation Precautions
Install this product in the following locations:
• A location that is horizontal and stable.
When you install the product onto a support structure/applicator, the complete assembly must be
sturdy and stable.
Attach the support structure firmly to the floor or on production machinery.
• A location that has sufficient space for operating the product.
Install the product so that the media dispenser side is within the designated distance and height
relative to the applicator.
Install the media supply dispensers with an operational distance to the product’s input side.
Do not install this product in the following locations. Doing so could cause the product to malfunction.
• A location that is subject to vibration.
• A location with high temperature and humidity.
• A dusty location.
• A location exposed to direct sunlight.
• A location with a lot of electrical noise.
• A location with a large fluctuation in power.
2
Installing the Product
To Next Page
Loading...
