SATO S84 ex - Page 325

9 Appendix
323
S84-ex/S86-ex Operator Manual
RS-232C
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER 1ITEM (When READY/BUSY, XON/
XOFF is selected)
Yes Yes
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4 is selected) Yes Yes
USB
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4 is selected) Yes Yes
Bluetooth
Authentication Level NONE Yes Yes
PIN CODE 0000000000000000 Yes Yes
DEVICE NAME SATO_PRINTER Yes Yes
DISCOVERY SETTING ENABLE Yes Yes
PARAMETER SETTING(ISI) 0800 Yes Yes
PARAMETER SETTING(ISW) 0012 Yes Yes
PARAMETER SETTING(PSI) 0800 Yes Yes
PARAMETER SETTING(PSW) 0012 Yes Yes
PROTOCOL STATUS4 Yes Yes
CRC CHECK DISABLE Yes Yes
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4 is selected) Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)