SATO S84 ex - Adjusting the Timing Belt Tension (Ribbon Motors, Optional Ribbon Saver Motor)

4 Operation and Configuration
51
S84-ex/S86-ex Operator Manual
•Buzzer volume
• Emulation mode
• Warning Icons
Icon Description
Shows when the volume is level 3 (Loud).
Shows when the volume is level 2 (Medium).
Shows when the volume is level 1 (Low).
Shows when the volume is level 0 (Mute).
Icon Description
Shows when SZPL emulation module is loaded.
Shows when SDPL emulation module is loaded.
Shows when SIPL emulation module is loaded.
Icon Description
Shows when a ribbon “near end” is detected.
Shows when a label “near end” is detected.
Shows when a command error is detected.
Shows when a receive buffer “near full” is detected.
Shows when print head damage is detected.
Shows when an incompatible print head is detected.