Before You Start
9
S84-ex/S86-ex Operator Manual
Warning
Handling the power cord and other cables
• Do not damage, break, or alter the power
cord and other cables. Also, do not place
heavy objects on the power cord, apply
heat to it, place it in high-temperature
locations, or forcibly bend, twist, or pull it.
Doing so could result in a fire or electric
shock.
• Do not splash water on the power cord or
get it wet. Doing so could result in
damage or electric shock.
• If the power cord and other cables
become damaged (core is exposed,
wires broken, deformed, etc.), contact
your SATO reseller or technical support.
Using the power cord and other cables in
this condition could result in a fire or
electric shock.
• The dedicated power cord included in
the package is to be used specifically for
this product. Do not use it for other
electronic products. Also, do not use the
power cord of other products for this
product. Doing so could result in a fire or
electric shock.
Always ground the connections
• Always connect the product’s ground
wire to a ground. Not grounding the
ground wire could result in electric
shock.
Do not use the product when something is
abnormal
• Do not use the product if any abnormality
such as smoke or an unusual odor is
detected. Doing so could result in a fire
or electric shock. Immediately power off
the product, unplug the power cord from
the outlet, and contact your SATO
reseller or technical support for repairs.
Do not place containers holding water or other
liquid near the product
• Do not place flower vases, cups, or other
containers holding liquids, such as water
or chemicals, near the product. If water
or chemicals get inside the product,
immediately power it off, and contact
your SATO reseller or technical support.
Using the product in this condition could
result in a fire or electric shock.
Do not drop the product in water
• Do not use the product near a container
holding liquid. If the product is dropped
into water, immediately power it off, and
contact your SATO reseller or technical
support. Using the product in this
condition could result in a fire or electric
shock.
Do not put objects inside the product
• Do not insert or drop any metal or
flammable objects down the opening
(cable port, etc.) of the product. If a
foreign object gets inside the product,
immediately power it off, unplug the
power cord from the outlet, and contact
your SATO reseller or technical support.
Using the product in this condition could
result in a fire or electric shock.
Connecting cables or optional devices
• Before connecting a cable or optional
device to the product, be sure to power
off the product and the optional devices.
If they are connected with the power on,
an optional device could move
unexpectedly, resulting in injury, electric
shock, or damage.
• When installing a cable or optional
device, be sure not to make a mistake in
the orientation and steps to install.
Otherwise, it could result in injury, fire,
electric shock, or damage.
• Do not use cables other than the ones
supplied with the product or
recommended by us. Doing so could
result in smoke, fire, electric shock, or
damage.
To Next Page
Loading...
