SATO S84 ex - Page 123

4 Operation and Configuration
121
S84-ex/S86-ex Operator Manual
CARD SLOT SELECT
Set the memory storage allocation for each card slot for use with the
Memory card command <CC>. A total of three slots can be set (Slot 0-2).
Each card slot can be allocated to the following options:
• RAM
• FROM (Flash ROM)
• SD (SD card)
• USB (USB memory)
•NO USE
Note
• Other than the NO USE option, a memory storage allocated to a card
slot cannot be allocated to another card slot.
• Refer to the Programming Reference for details on the command.
MEMORY MODE
Perform the memory settings.
The following options are available:
• MEMORY SIZE: Check the free size of the selected memory.
• STORED CONTENTS: Shows the information that is registered in the
selected memory.
• SETTING SAVE: Save the setting information of the product to the
selected memory.
• SETTING UPLOAD: Update the setting information stored in the
selected memory.
• FORMAT: Initialize and format the selected memory.
• BACK: Returns to the MEMORY CARD MODE screen.
PLEASE SELECT MEMORY
Select the memory you want to perform the settings.
The following options are available:
• SD CARD
• USB MEMORY
•ROM
Note
Shows only if MEMORY MODE is set to MEMORY SIZE, STORED
CONTENTS or FORMAT.