SATO S84 ex - Page 125

4 Operation and Configuration
123
S84-ex/S86-ex Operator Manual
STORED NO. INFORMATION
Shows the stored number of the registered information.
(If items other than TTF FILE are selected in STORED CONTENTS)
The stored number range is from 001 to 999.
Note
• Press the
/ buttons to scroll each line up or down. Press the
/ buttons to page up or down.
• After you press the ENTER button, the screen returns to PLEASE
SELECT MEMORY.
STORED FONT INFORMATION
Shows the stored font of the registered information.
(If TTF FILE is selected in STORED CONTENTS)
The following example shows the display format:
E:Aaaaaaaaaaaaaa
E: Font ID
Aaaaaaaaaaaaaa: Font name (a maximum of fourteen characters)
Note
• Press the
/ buttons to scroll each line up or down. Press the
/ buttons to page up or down.
• After you press the ENTER button, the screen returns to PLEASE
SELECT MEMORY.
MEMORY FORMAT
Select whether or not to format the memory.
• YES: Format the memory.
• NO: Do not format the memory.
Note
If you select NO, the screen returns to MEMORY CARD MODE.
77)),/(
($DDDDDDDDDDDDD
=77)1DPH