SATO S84 ex - Page 144

4 Operation and Configuration
142
S84-ex/S86-ex Operator Manual
PRINTER MODEL
Select the product model based on print darkness in compatible mode.
• M8485/90/60/65Se: Triple the value for Print Darkness <#E> and set it
as the print darkness.
• S84/M8459Se: Double the value for Print Darkness <#E> and set it as
the print darkness.
Note
• Shows only if COMPATIBLE MODE DARKNESS is set to ENABLE.
• This table explains that the system accepts the legacy Print Darkness
setting command and does not guarantee that the printed darkness of
the succeeding model will be the same as the older model.
Print Darkness value <#E> The value converted as
Print Darkness value <#F>
13
26
39
Print darkness value <#E> The value converted as
Print Darkness value <#F>
12
24
36
48
510