SATO S84 ex - Page 250

5 Emulation Mode
248
S84-ex/S86-ex Operator Manual
LABEL SIZE ADJ HEIGHT
Set the height of the media.
The setting range varies depending on the following model:
Note
Shows only if SIZE MODE is set to LCD.
Shift
Set the shift offset position of the label.
The setting range varies depending on the following model:
Top
Set the top offset position of the label.
The setting range is from -120 to +120.
The measurement unit is in dot.
Model Setting Range (dot)
S84-ex (203 dpi) 00000 to 20000
S84-ex (305 dpi) 00000 to 18000
S84-ex (609 dpi) 00000 to 09600
S86-ex (203 dpi) 00000 to 09992
S86-ex (305 dpi) 00000 to 14988
/$%(/6,=($'-
+(,*+7
Model Setting Range (dot)
S84-ex (203 dpi) -0832 to +0832
S84-ex (305 dpi) -1248 to +1248
S84-ex (609 dpi) -2496 to +2496
S86-ex (203 dpi) -1340 to +1340
S86-ex (305 dpi) -2010 to +2010