SATO S84 ex - Page 259

5 Emulation Mode
257
S84-ex/S86-ex Operator Manual
BOLD STYLE
Set whether or not to print the scalable TrueType font in bold style.
• ENABLE: The scalable TrueType font is always printed in bold style.
• DISABLE: The scalable TrueType font is not printed in bold style.
Note
Shows only if TTF STYLE PRIORITY is set to LCD.
ITALIC STYLE
Set whether or not to print the scalable TrueType font in italic style.
• ENABLE: The scalable TrueType font is always printed in italic style.
• DISABLE: The scalable TrueType font is not printed in italic style.
Note
Shows only if TTF STYLE PRIORITY is set to LCD.
SENSOR PRIORITY
Set the priority of SDPL sensor.
Two options can be selected as follows:
• COMMAND: The setting is according to SDPL command.
• LCD: The setting is according to PRINTER FEEDBACK PRIORITY
screen. Commands <STX>c, <STX>e and <STX>r are ignored.
PRINTER FEEDBACK PRIORITY
Set the priority of printer feedback.
Two options can be selected as follows:
• COMMAND: The setting is according to <STX>a command. This
command is effective until you restart the product
• LCD: The setting is according to PRINTER FEEDBACK screen.
%2/'67</(
(1$%/(',6$%/(
,7$/,&67</(
(1$%/(',6$%/(
&200$1'/&'
&200$1'/&'