SATO S84 ex - Page 262

5 Emulation Mode
260
S84-ex/S86-ex Operator Manual
FORMAT STORE
Set whether to save the user format data registered at printing in the
product.
The options are as follows:
• DISABLE: Do not save the user format data registered at printing in the
product. The user format data remains in the memory of product until
the product is powered off. You need to register a user format again
after restart.
• ENABLE: Save the user format data registered at printing in the
product.
0 SLASH
Set whether to print the number zero (0) with or without a slash (/).
The options are as follows:
• OFF: Print zero without a slash.
• ON: Print zero with a slash.
FONT c20 PITCH
Set whether to print each character using a fixed pitch or proportional pitch
spacing.
The options are as follows:
• FIXED: Print all characters with the fixed pitch.
• PROP: Print each character with proportional pitch spacing.
CODEPAGE
Select the code page to be used from the list.
The options are as follows:
• 1252
• 1253
• 1254
• 1255
• 1256
• 1257
• 850
• 1250
• 1251