SATO S84 ex - Page 270

6 Adjusting the Product
268
S84-ex/S86-ex Operator Manual
4 Press the ENTER button to enter the
user mode.
OFFSET VOLUME shows on the screen.
Note
If password function is enabled, PASSWORD is shown
on the screen instead. In this case, enter the password
first.
5 Press the ENTER button again until
PRINT SPEED shows on the screen.
6 Press the / buttons to select a value.
7 Press the ENTER button to save the
setting.
8 Press the FUNCTION button to return to
the setting mode menu.
