7 Maintenance
288
S84-ex/S86-ex Operator Manual
8 Clean the bottom of the feed roller and
media sensor assembly using the
cotton cloth dabbed with cleaning liquid.
9 You can remove the media sensor
cover to clean the surface easily.
Remove the thumbscrew attached to
the media sensor cover.
10
To assemble the media sensor cover
, make sure that you insert the tab of
the media sensor cover to the slot as
shown.
Then, attach the media sensor cover
using the thumbscrew .
11
Turn the head lock lever
counterclockwise to lock the print head.
12
Press the feed roller and media sensor
assembly down until the feed lock
latch is locked.
To Next Page
Loading...
