SATO S84 ex - Page 323

9 Appendix
321
S84-ex/S86-ex Operator Manual
LAN
IGNORE CAN/DLE NO (When STATUS4 is selected) Yes Yes
SNTP FUNCTION DISABLE Yes No
IPv4/6 select IPv4 Yes No
NTP IPv4 ADDRESS
NTP IPv6 ADDRESS
IPv4: 000.000.000.000
IPv6: 0000:0000:0000:0000:
0000:0000:0000:0000
Yes No
TIME ZONE 00:00 Yes No
ERROR NOTICE DISABLE Yes No
SNMP FUNCTION DISABLE Yes No
SNMP SETTING
COMMUNITY NAME SNMP v1/v2c[1]: public
SNMP v1/v2c[2]: Null
No No
COMMUNITY WRITE DISABLE No No
USER NAME Null No No
AUTH PROTOCOL NONE No No
AUTH KEY Null No No
PRIVACY PROTOCOL NONE No No
PRIVACY KEY Null No No
USER MIB WRITE DISABLE No No
SNMP TRAP SET
TRAP TYPE SELECT SNMPv2c No No
TRAP DISABLE No No
COMMUNITY NAME Null No No
USER NAME Null No No
AUTH PROTOCOL NONE No No
AUTH KEY Null No No
PRIVACY PROTOCOL NONE No No
PRIVACY KEY Null No No
IPv4/6 select IPv4 No No
TRAP IPv4 ADR 000.000.000.000 No No
TRAP IPv6 ADR 0000:0000:0000:0000:
0000:0000:0000:0000
No No
FTP FUNCTION ENABLE Yes No
TELNET FUNCTION ENABLE Yes No
Setting Item Initial Value
Default
(User)
Default
(Shipping)