SATO S84 ex - Page 328

9 Appendix
326
S84-ex/S86-ex Operator Manual
SET CALENDAR
CALENDAR MONTH CODE JANUARY A
FEBRUARY B
MARCH C
APRIL D
MAY E
JUNE F
JULY G
AUGUST H
SEPTEMBER J
OCTOBER K
NOVEMBER L
DECEMBER M
No Yes
CALENDAR CASE FORMAT MIXED No Yes
CALENDAR CHECK DISABLE Yes Yes
CHARACTER PITCH PROPORTIONAL Yes Yes
PROTOCOL CODE STANDARD Yes Yes
NON STANDARD CODE SETTING STX=7Bh, ETX=7Dh, ESC=5Eh,
ENQ=40h, CAN=21h, NULL=7Eh,
OFFLINE=5Dh
Yes with Default
(ALT. PROTOCOL)
RIBBON SAVER DISABLE Yes Yes
RIBBON SAVER ENABLED ON FEED NO Yes Yes
MODE SELECT SBPL Yes Yes
JOB MODIFICATION DISABLE No Yes
ROTATE LABEL DEG: 0 Yes Yes
LABEL SIZE ADJ WIDTH: S84-ex 8 dots/mm: 0832
12 dots/mm: 1248
24 dots/mm: 2496
S86-ex 8 dots/mm: 1340
12 dots/mm: 2010
Yes Yes
LABEL SIZE ADJ HEIGHT: S84-ex 8 dots/mm: 20000
12 dots/mm: 18000
24 dots/mm: 9600
S86-ex 8 dots/mm: 9992
12 dots/mm: 14988
No No
IGNORE A1 NO Yes Yes
PAPER END I-MARK Yes Yes
PAPER END DISTANCE DEFAULT Yes Yes
LCD POWER SAVING 00 MIN Yes Yes
LED INDICATION ON Yes Yes
ERROR INDICATION NONE Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)