SATO S84 ex - Page 336

9 Appendix
334
S84-ex/S86-ex Operator Manual
SignalLevel3
Field intensity setting
threshold 3
Absolute value from 00 to
99
Yes 64
FWversion
Firmware version of the
WLAN module
x.x.x. No NULL
BuildDate
Firmware date of the
WLAN module
YYYYMMDD No NULL
RootPassword
Login password of the
TELNET root user
0 - 16 half-width
alphanumeric characters
Yes NULL
KeepAliveTime
Retry intervals of TCP
KeepAlive packet
30 - 300 (sec) Yes 180
KeepAliveCount
Retry number of TCP
KeepAlive packet (times)
1 - 99 Yes 17
ROMCheckSumBoot
Check sum boot loader
area
2 bytes HEX (ASCII) No NULL
ROMCheckSum
Check sum application
area
2 bytes HEX (ASCII) No NULL
ROMCheckSumLoader Check sum loader area 4 bytes HEX (ASCII) No NULL
FtpClientEnableService FTP client setting
0: DISABLE
1: ENABLE
Yes DISABLE
FtpClientLoginUser FTP client user name 1 - 32 characters Yes “sato”
FtpClientLoginPassword FTP client password 1 - 32 characters Yes “sato”
FtpServerIPAddress FTP server IP address xxx.xxx.xxx.xxx Yes 0.0.0.0
FtpServerURL FTP server URL 0 - 48 characters Yes “ftp://sato.co.jp”
FtpServerPort FTP port number 1 - 65535 Yes 21
FtpConnectRetryPeriod Reconnection interval 1 - 100 Yes 10
FtpConnectRetryTimes
Reconnection number of
retry
0: no retry
1 - 10
255: keep retrying until
connected
Yes 5
FtpJobTimeout Job timeout 0 - 600 (sec) Yes 300
FtpUsePassiveMode
ENABLE/DISABLE
Passive mode
0: DISABLE
1: ENABLE
Yes DISABLE
TelnetDisableService TELNET Function
0: ENABLE
1: DISABLE
Yes ENABLE
FtpDisableService FTP Function
0: ENABLE
1: DISABLE
Yes ENABLE
SntpEnableService SNTP Function
0: DISABLE
1: ENABLE
Yes DISABLE
SnmpEnableService SNMP Function
0: DISABLE
1: ENABLE
Yes DISABLE
Setting Item Overview Contents
Default
(WLAN)
Initial Value