9 Appendix
364
S84-ex/S86-ex Operator Manual
The types of errors to print are as follows:
Message Cause and Countermeasure
TAG NOT FOUND Cause Did not find the tag to print, or failed to read the tag.
Countermeasure Confirm the inlay operation and check the product/antenna
configuration.
WRITE TAG ERROR Cause Failed to write the tag.
Countermeasure Confirm the inlay operation and check the product/antenna
configuration.
VERIFY ERROR Cause The written value and the read value do not match.
Countermeasure Confirm the inlay operation and check the product/antenna
configuration.
LOCKING ERROR Cause Failed to lock the tag.
Countermeasure Check the media.
MULTI TAGS ERROR Cause Multiple tags captured at a time.
Countermeasure Confirm the inlay operation and check the product/antenna
configuration.
READ ONLY ERROR Cause Succeeded to read but failed to write the tag.
Countermeasure Confirm the inlay operation and check the product/antenna
configuration.
To Next Page
Loading...
