SATO S84 ex - Page 80

4 Operation and Configuration
78
S84-ex/S86-ex Operator Manual
NOTICE FUNCTION (ENABLE/DISABLE)
Enable or disable the notification for the item selected in the above
NOTICE FUNCTION.
• ENABLE: Enable the notification function.
• DISABLE: Disable the notification function.
CLEAN PRINTER
Set the notification distance for cleaning the product.
The setting range is from 000 to 999 m.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE ROLLER
Set the notification distance for changing the platen roller.
The setting range is from 000 to 150 km.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE HEAD
Set the notification distance for changing the print head.
The setting range is from 000 to 150 km.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE TIMING BELT (GEAR BOX)
Set the notification distance for changing the gear box timing belt.
The setting range is from 000 to 300 km.
Note
The notification function will be disabled if the distance is set to 0.
P
NP
NP
NP