www.schaerer.com Basic operation
PASCA_TOUCHIT_EN
V02 | 07.2013
18
Option 1: Hex load (Update SCA software) from the service technician USB stick:
The data are transferred from the USB stick to the CPU via the TouchIT.
A) = TouchIT software
B) = SCA software (machine software)
Option 2: Procedure for a hex load (Update SCA Software) from the TouchIT:
The data are transferred directly from the TouchIT to the CPU.
B) = SCA software (machine software).
Option 3: Procedure for updating the TouchIT software:
The machine software and the TouchIT software are transferred from the service technician
USB stick to the TouchIT.
A) = TouchIT software
B) = SCA software (machine software)
See See "Service technician menu" - "System" - "Exit application" - "Hex load update" for a
description of the individual steps.
See See "Service technician menu" - "System" - "Exit application" - "Hex load update" for a
description of the individual steps.
To Next Page
Loading...
