www.schaerer.com Programming
PASCA_TOUCHIT_EN
V02 | 07.2013
28
Programming
The following topics are contained under "Programming":
• SERVICE card
• Access
• Navigation
• Overview (menu items)
SERVICE card
The SERVICE card enables access to the main menus. Access is PIN-protected (personal
identification number).
• The PIN for the menus, except for the "System Parameters" menu, can be freely config-
ured and is stored on the SERVICE card.
• The PIN [ 9119 ] for the "System Parameters" menu is fixed and cannot be changed.
Access
Access to main menus
► Insert the SERVICE card at the top right.
The PIN keypad appears.
This PIN (personal identification number) is preset in the "System parameters" menu using the
[Change PIN] parameter.
► Enter the PIN on the keypad.
The main menu is displayed.
These topic are described in this chapter.
Programming requires a chip card and, in part, the entry of a PIN.
See "Basic operation"- "SERVICE card" - "Gaining access with the SERVICE card" on using
the SERVICE card.
See "Service technician menu" - "System" - "Chip card service" on changing the PIN.
See "System" - "Chip card service" - "Changing the PIN".
To Next Page
Loading...
