www.schaerer.com System
PASCA_TOUCHIT_EN
V02 | 07.2013
90
Resetting a beverage
► Select "System Parameters".
► Select "Edit system parameters" (PIN entry required).
► Select the "Reset product pool" parameter.
A warning message with an entry request appears.
Option 1: Delete the beverage settings
► Select the [OK] field.
All selectable beverage fields are labelled "No product".
Option 2: Retain the beverage settings without deletion
► Select the [Cancel] field.
The beverage settings are not changed.
Master Reset
This function sets all possible settings back to the standard setting.
► Select "System Parameters".
► Select "Edit system parameters" (PIN entry required).
► Select the "Master Reset" parameter.
A warning message with an entry request appears.
Option 1: Reset all settings.
► Select the [OK] field.
All settings are reset to the standard settings.
The beverage settings are reset.
The system parameters are reset to the standard settings.
All counters are reset.
Option 2: Retain the settings.
► Select the [Cancel] field.
No settings are changed.
Clear error log
This function resets the error statistics and the cleaning statistics permanently.
► Select "System Parameters".
27) Brewer repress Switches repressing on and off.
It is recommended that you switch "Brewer
repress" on.
Consequences of not using repressing:
• Some coffee water remains in the hose
between the brewing unit and the outlet.
• This remaining coffee water influences
the dispensing temperature.
On/off The standard setting is
"ON".
Parameter settings with
"OFF" can cause contami-
nation (coffee particles) in
the booster.
Parameters: System parameters
Display text Description Setting range Notes
See "Programming" - "Access".
See "Programming" - "Access".
To Next Page
Loading...
