PASCA_TOUCHIT_EN
V02 | 07.2013
53
www.schaerer.comConfiguration
► Press the [Save] field.
The beverage field with the beverage settings is moved to the new position.
If a beverage field is selected that is already in use, the beverages are exchanged.
Deleting a beverage
► Select the beverage field to be deleted.
The "Action" selection menu appears.
► Select the [Delete product] field.
► Press the [Save] field.
The beverage with the settings is deleted from the beverage field.
The full selection is available again, depending on the machine configuration.
Assigning a beverage price
► Select the beverage field.
The "Action" selection menu appears.
► Select the [Product prices] field.
The "Product prices" menu appears.
The "Product prices" menu contains the following submenus:
•Price
• Price group
To assign a price to a beverage field:
► Press the price field for ±1 sec.
The keypad appears.
► Enter the beverage price on the keypad and adopt it using the [Confirm] field.
The beverage has been assigned a price.
Assigning a beverage price group
Assigning a beverage group generates a counter for the assigned beverages. The counter sta-
tistics can be viewed with the SERVICE card or PROGRAM card.
► Select the [6 Price group] field.
The selection menu with the price groups appears.
► Select the desired price group.
•no
• Group 1
• Group 2
• Group 3
► Press the [Save] field.
The beverage field is assigned to a price group.
See "Service technician menu" - "Accounting" - "Payment systems setup" for the "Price pre-
view" presetting.
See "Service technician menu" - "System" - "Chip card service" - "Simulate PROGRAM card"
on displaying the turnover and the beverage group counters.
The parameters of newly assigned beverages are already preset with standard values.
To Next Page
Loading...
